+86-577-85883661
Fermentation Tank
video
Fermentation Tank

Fermentation Tank

The Fermentation Tank is designed for main fermentation processes where stable temperature, mixing, aeration and hygienic conditions need to be maintained throughout the batch. Its configuration is determined by the actual fermentation process rather than vessel capacity alone.
Send Inquiry
Product Details ofFermentation Tank

The Fermentation Tank is designed for main fermentation processes where stable temperature, mixing, aeration and hygienic conditions need to be maintained throughout the batch. Its configuration is determined by the actual fermentation process rather than vessel capacity alone.

 

Key Technical Reference

 

Item

Technical Reference

Internal Surface Finish

Ra < 0.4 μm

Small-Scale Sterilization

115°C / 30 min, applicable to 5 L units

Larger Tank Sterilization

121°C / 30 min steam sterilization, reference condition

Pressure During Operation

Approx. 0.05 MPa, depending on process

Process Control

Temperature, pH, agitation, DO

Product-Contact Material

SS304 / SS316L, according to process

 

Start With the Fermentation Process, Not the Tank Size

 

Process information

Why it matters

Batch / working volume

Determines usable fermentation capacity

Fermentation temperature

Determines heating and cooling requirements

Broth viscosity

Affects agitator selection

Aeration demand

Determines air distribution configuration

Foaming tendency

Affects headspace and foam-control provisions

Sterility requirement

Influences tank connections and cleaning/sterilization design

 

Control the Conditions That Affect Fermentation

Temperature

Heating or cooling is configured according to the required fermentation temperature and heat load.

PH

A pH electrode and control interface can be provided where pH adjustment is required.

Agitation

Agitator speed and impeller configuration are selected according to broth characteristics and mixing requirements.

DO

DO monitoring can be integrated for aerobic fermentation, with electrode calibration performed under specified agitation and aeration conditions.

Sterilization According to Tank Scale

 

For applicable 5 L small-scale fermentation tanks, the prepared medium can be sterilized in an external autoclave, with 115°C for 30 minutes as a reference condition.

 

For larger fermentation tanks, steam sterilization at 121°C for 30 minutes can be used as a reference sterilization condition, subject to the actual process and equipment configuration.

 

Hygienic Design Is Part of the Fermentation Process

 

Product-contact surfaces can be polished to Ra < 0.4 μm to support cleaning and sterilization and reduce material retention.

Other hygienic considerations include:

  • SS304 or SS316L product-contact material
  • Smooth internal surfaces
  • Drainable vessel design
  • Sanitary process connections
  • Sampling arrangement
  • CIP connections
  • SIP configuration where required

 

Process Integration

 

The main fermentation tank is normally connected with upstream seed preparation and downstream processing. Its inlet, outlet, transfer line and instrumentation should therefore be considered together with the surrounding equipment.

 

A typical process connection can be arranged as:
Seed Tank → Fermentation Tank → Transfer / Downstream Processing

 

The connection layout can be adapted according to the required transfer method, pipeline arrangement and cleaning requirements.

 

Match the Tank to Your Fermentation Medium

 

The fermentation medium also affects material selection, discharge arrangement and cleaning requirements. Media with solids, higher viscosity or specific hygiene requirements may require different vessel and connection configurations.

Before selection, buyers should confirm:
Solids content → Discharge characteristics → Material compatibility → Cleaning method

 

What to Provide for a Fermentation Tank Quotation

 

To configure the tank correctly, buyers should provide:

  • Required: Working volume, fermentation medium and operating temperature.
  • Useful for detailed configuration: aeration requirement, agitation conditions, pH range, DO requirement, sterilization method, heating/cooling utility and existing process connections.

 

FAQ

 

Q: How is fermentation tank working volume determined?

A: It should be based on the actual batch volume, with sufficient headspace for aeration, foaming and normal operation.

Q: How is the agitator selected?

A: Agitator configuration depends on broth viscosity, solids content, aeration and required mixing intensity.

Q: Can the tank provide both heating and cooling?

A: Yes. The heat-transfer arrangement can be configured according to the required fermentation temperature and process duty.

Q: What does Ra < 0.4 μm mean for the tank?

A: It indicates a smooth internal surface finish that supports cleaning and sterilization and helps reduce material retention.

Q: Can the tank be configured for aerobic fermentation?

A: Yes. Aeration and DO monitoring can be incorporated where required, with the air distribution and agitation configuration matched to the fermentation process.

Q: Can the fermentation tank be connected to an existing CIP system?

A: Yes. CIP connections can be incorporated according to the existing cleaning circuit, connection size and required cleaning arrangement.

Hot Tags: fermentation tank, China fermentation tank manufacturers, suppliers, factory, fermentation, Fermentation Tank, Seed Tank

Previous
No Information

Send Inquiry

(0/10)

clearall