+86-577-85883661
Industrial Concentrators & Evaporators

 

Tanlet Machinery manufactures industrial concentrators and evaporators for pharmaceutical, biopharmaceutical, food, fine chemical, battery material, semiconductor, and daily chemical processing.


Tanlet configures evaporation systems around feed properties, evaporation duty, target concentration, thermal conditions, vacuum requirements, and available utilities. The product range includes multi-effect, MVR, heat pump, falling-film, rising-film, forced-circulation, wiped-film, and vacuum evaporation systems.

 

 
 
Industrial Evaporator Product Range
 
Three-effect Energy-saving Evaporator

Multi-Effect Evaporators

  • Balanced Double Effect Evaporator: Two-effect evaporation system with staged vapor utilization between the effects.
  • Three-effect Energy-saving Evaporator: Three-effect evaporation system with sequential vapor reuse across the evaporation effects.

 

MVR & Heat Pump Evaporators

  • MVR Rising Film Evaporator: Rising-film evaporation system integrated with mechanical vapor recompression.
  • Heat Pump Double Effect Evaporator: Two-effect evaporation system integrated with heat pump technology.

 

Falling Film & Rising Film Evaporators

  • Triple Effect Falling Film Evaporator: Three-effect falling-film evaporation system with sequential vapor utilization.
  • Double Effect Falling Film Evaporator: Two-effect falling-film evaporation system with staged vapor utilization.
  • Rising Film Evaporator: Rising-film evaporation system in which the liquid-vapor mixture moves upward through the heating tubes.

Forced Circulation & Wiped Thin Film Evaporators

  • Forced Circulation Evaporator: Evaporation system using an external circulation pump to move process liquid through the heating section.
  • Wiped Thin Film Evaporator: Evaporation system using a rotating wiping mechanism to maintain a thin liquid film on the heated surface.

 

Vacuum Evaporators

  • Vacuum Spherical Evaporator: Spherical vacuum evaporation vessel for batch evaporation and concentration processes.
  • Single-effect External Circulation Vacuum Evaporator: Single-effect vacuum evaporation system with an external circulation loop and separate heat-transfer section.
Single-effect External Circulation Vacuum Evaporator

 

Evaporator Selection by Feed & Process Conditions
 

Feed / Process Condition

Suitable Configuration

Tanlet Equipment

Low-viscosity liquid

Falling film / rising film

Triple Effect Falling Film; Double Effect Falling Film; Rising Film

High-viscosity liquid

Forced circulation / wiped thin film

Forced Circulation; Wiped Thin Film

High-solids or scaling-prone feed

Forced circulation

Forced Circulation

Heat-sensitive material

Falling film / wiped thin film/vacuum

Falling Film; Wiped Thin Film; Vacuum Evaporators

Continuous concentration

Film, multi-effect, or MVR evaporation

Rising Film; Falling Film; Multi-Effect; MVR

Reduced fresh-steam demand

Multi-effect, MVR, or heat pump

Balanced Double Effect; Three-effect Energy-saving; MVR; Heat Pump Double Effect

Vacuum concentration

Vacuum evaporation

Vacuum Spherical; External Circulation Vacuum

Batch evaporation

Vacuum batch evaporation

Vacuum Spherical

Concentration before crystallization

Forced circulation, MVR, or multi-effect

Forced Circulation; MVR; Multi-Effect

Final equipment selection depends on feed properties, evaporation duty, concentration target, operating conditions, and utility availability.

 

Evaporation Capacity & Operating Conditions
 

Parameter

Specification

Water Evaporation Capacity

1,000 / 2,000 / 2,500 / 3,000 kg/h

Heating Steam Pressure

0.25 MPa

Steam Consumption

Approx. 550–1,650 kg/h

Cooling Water Consumption

Approx. 35–105 t/h

Vacuum Degree

-0.06 to -0.095 MPa

Gas Throughput

280–500 m³/h

Evaporation Temperature

First effect: 45–60°C; Second effect: 75–80°C

Actual specifications are configured according to feed properties, evaporation capacity, concentration requirements, utilities, and project conditions.

 

Integrated Evaporation Systems
 
Vacuum Spherical Evaporator

Tanlet can supply the evaporator together with the associated process equipment required for a complete evaporation line.


Typical process flow:
Feed → Preheating → Evaporation → Vapor Separation → Condensation / Vapor Reuse → Concentrate


Depending on the process, the system can integrate:
Feed & Heating

  • Feed tanks and pumps
  • Preheaters
  • Heating calandria / heat exchangers

Evaporation & Vapor Handling

  • Evaporation chambers
  • Vapor-liquid separators
  • Condensers
  • Vacuum systems
  • Circulation pumps
  • Condensate systems

Automation & Downstream Integration

  • PLC control
  • Downstream crystallization equipment

 

 
Applications
 

Tanlet evaporation equipment and systems are used in:

01/

Pharmaceutical & Biopharmaceutical — Concentration of process liquids, extracts, and other pharmaceutical-related streams

02/

Food Engineering — Concentration of food-processing liquids and extracts

03/

Fine Chemicals — Controlled evaporation and concentration of chemical process streams

04/

Battery Materials — Evaporation and concentration processes associated with battery-material production

05/

Semiconductor & Electronic Chemicals — Controlled process-liquid concentration

06/

Daily Chemicals — Concentration of raw materials and formulations

 

Custom Configuration & Project Scope
 

Tanlet configures industrial evaporation systems according to process conditions, equipment requirements, and plant interfaces.

Configuration Area

Available Options

Process Design

Evaporation capacity, concentration target, operating temperature, vacuum level

Evaporation Configuration

Multi-effect, MVR, heat pump, falling film, rising film, forced circulation, wiped film

Wetted Materials

Material selection according to feed properties and project requirements

Heating System

Steam, MVR, heat pump, or other specified heating arrangements

Vacuum System

Vacuum equipment and operating configuration according to process requirements

Automation

PLC control, instrumentation, monitoring, and process interlocks

Equipment Interfaces

Piping connections, feed/discharge interfaces, utility connections, and layout requirements

Project Documentation

Equipment drawings, process documentation, inspection records, and other agreed project documents

 

 

Quality Control, Compliance & Validation

 

Quality Assurance & NDT

Material verification (PMI/MTC), 100% dimensional checks, non-destructive weld inspection (NDT/RT/UT), hydrostatic pressure testing, and helium leak testing.

Certified Manufacturing

Manufactured in accordance with ASME "U" Stamp authorization, CE, Class I/II/III Pressure Vessel Licenses, and Class GC2 Pressure Pipeline Installation Qualifications.

GMP Validation Packages

Complete documentation support for pharmaceutical/biotech projects, including DQ/IQ/OQ protocols, material certificates, and welding logs.

 

Factory Acceptance Testing

On-site FAT at our production facilities or live remote video FAT covering dimensional, functional, automation logic, and pressure tests before dispatch.

 

productcate-1-1
productcate-1-1
productcate-1-1

 

Manufacturing Capability

180,000+ m² Manufacturing Infrastructure

Tanlet operates production bases in Wenzhou and Lishui with more than 180,000 m² of combined manufacturing space and a workforce of 500+ employees.

116+ R&D & Engineering Personnel

Engineering resources cover process calculations, equipment design, piping layouts, structural design, and automation.

Integrated Manufacturing Scope

Equipment fabrication, assembly, piping integration, automation, testing, and project execution are supported within an integrated engineering workflow.

 

 

FAQ

 

Q: Which evaporator is suitable for high-viscosity or fouling feeds?

A: Forced circulation and wiped thin-film configurations can be considered for higher-viscosity or fouling-prone feeds. The appropriate configuration depends on viscosity, solids content, temperature, and fouling characteristics.

Q: Which evaporator is suitable for heat-sensitive products?

A: Falling-film, wiped thin-film, and vacuum configurations can be considered when reducing product residence time or boiling temperature is required. The appropriate choice depends on the product's thermal sensitivity and evaporation duty.

Q: Should I choose MVR or a multi-effect evaporator?

A: The selection depends on evaporation capacity, available steam and electricity, operating temperature, vapor conditions, and required energy configuration. Tanlet can configure either system based on the process data.

Q: Can the evaporator handle high-solids feeds?

A: Forced-circulation configurations can be considered where high solids content or scaling tendency makes conventional film evaporation unsuitable. Actual solids concentration and viscosity are required for equipment selection.

Q: Can the evaporator be integrated with a crystallization system?

A: Yes. Evaporation and crystallization can be configured as an integrated process where the concentration stage needs to feed a downstream crystallization process.

Q: What information is required for equipment selection?

A: Provide the feed composition, flow rate, initial concentration, target concentration, viscosity, solids content, thermal sensitivity, operating temperature, vacuum requirements, heating source, and available PFD/P&ID or URS.

Q: Can Tanlet manufacture and install a complete evaporation system?

A: Yes. The project scope can cover process engineering, equipment manufacturing, automation, installation, commissioning, and integration with associated process equipment.

As one of the most professional concentrator/evaporator manufacturers and suppliers in China, our products have good reputation in the market. We warmly welcome you to wholesale advanced concentrator/evaporator at competitive price from our factory. Good service and quality products are available.

(0/10)

clearall