+86-577-85883661
Wiped Thin Film Evaporator
video
Wiped Thin Film Evaporator

Wiped Thin Film Evaporator

The Wiped Thin Film Evaporator is designed for concentration duties where conventional evaporation may be limited by product viscosity, fouling behavior or thermal sensitivity.
Send Inquiry
Product Details ofWiped Thin Film Evaporator

The Wiped Thin Film Evaporator is designed for concentration duties where conventional evaporation may be limited by product viscosity, fouling behavior or thermal sensitivity.

 

A rotating wiper continuously distributes the product as a thin film across the heated surface, supporting controlled product movement and heat transfer as concentration increases.

 

Why the Wiping Action Matters

 

Thin Film Formation

Spreads the product into a thin film over the heated surface.

 

Film Renewal

Continuously renews the liquid layer during evaporation.

 

Product Movement

Helps move the product through the evaporation zone as concentration increases.

 

Surface Contact Control

Helps reduce prolonged accumulation of concentrated material on the heated surface.

product-495-793

 

Reference Equipment Configuration

 

The reference configuration shown in the equipment drawing includes a vertical wiped-film evaporation section, drive system, vapor line, condenser and receiving sections.

 

Item

Reference Value

Drive Motor

7.5 kW

Rotor Speed

134 rpm

Evaporation Section

Vertical wiped-film configuration

Condensation

External condenser

Product Handling

Concentrate receiving section

 

Reference equipment drawing. Final equipment configuration, dimensions and operating parameters are determined according to the actual process requirements.

 

Process Fit

 

A wiped thin film evaporator may be considered when conventional evaporation becomes difficult because of the characteristics of the product or the required concentration process.

01/

Heat-Sensitive Products
Suitable for processes where prolonged thermal exposure needs to be limited.

02/

Increasing Viscosity
Useful when viscosity rises significantly as solvent is removed.

03/

Fouling-Prone Materials
Considered when the product may form deposits on heated surfaces.

04/

High Final Concentration
Applicable when product flow becomes increasingly difficult at higher concentrations.

05/

Low Hold-Up Requirements
Suitable for processes where limited liquid residence in the evaporation zone is preferred.

When Another Evaporator May Be More Appropriate


Clean, Low-Viscosity Products: Conventional evaporators may be sufficient when the product has stable flow properties and limited fouling or thermal constraints.

 

High-Throughput Applications: Other evaporator configurations may be considered when high throughput is required and the product remains easy to process during concentration.

 

Application-Specific Selection: The appropriate evaporator depends on product properties, evaporation duty, operating conditions and the required concentration range.

 

Process Information for Evaluation

For preliminary process assessment, provide:

  • Feed composition and flow rate
  • Initial and target concentration
  • Viscosity at relevant concentration points
  • Feed and target product temperature
  • Thermal sensitivity or allowable heat exposure
  • Fouling or deposit-forming characteristics
  • Required evaporation capacity
  • Heating and cooling conditions
  • Operating pressure or vacuum requirements, where applicable

 

FAQ

 

Q: Can an existing evaporation process be evaluated for a wiped thin film configuration?

A: Yes. An existing process can be reviewed based on its current operating conditions, concentration requirements and process limitations.

Q: Can the equipment be integrated with other process equipment?

A: Yes. Integration with feed systems, condensers, vacuum equipment and downstream product handling can be evaluated according to the overall process layout.

Q: Is pilot testing required before selecting a full-scale system?

A: Not necessarily. The need for testing depends on available process data, product behavior and the uncertainty associated with scale-up.

Q: Can the equipment configuration be adapted to different process requirements?

A: Yes. The configuration can be determined according to the product characteristics, evaporation duty and operating conditions.

Q: What should be included in an equipment inquiry?

A: Provide the available process data and clearly define the required concentration, evaporation capacity and operating conditions. Additional information may be requested during the technical evaluation.

Hot Tags: wiped thin film evaporator, China wiped thin film evaporator manufacturers, suppliers, factory, Double Effect Falling Film Evaporator, Rising Film Evaporator, Single effect External Circulation Vacuum Evaporator, Three effect Energy saving Evaporator, Vacuum Spherical Evaporator, Wiped Thin Film Evaporator

Send Inquiry

(0/10)

clearall