+86-577-85883661
Shell and Tube Heat Exchanger
video
Shell and Tube Heat Exchanger

Shell and Tube Heat Exchanger

The Shell And Tube Heat Exchanger is designed for indirect heat transfer between two process fluids. One medium flows through the tubes while the other passes through the shell side, allowing heating, cooling or heat recovery without direct contact between the fluids.
Send Inquiry
Product Details ofShell and Tube Heat Exchanger

The Shell And Tube Heat Exchanger is designed for indirect heat transfer between two process fluids. One medium flows through the tubes while the other passes through the shell side, allowing heating, cooling or heat recovery without direct contact between the fluids.

 

The exchanger is configured according to heat-transfer duty, fluid properties, operating pressure and temperature, allowable pressure drop, material compatibility and installation requirements.

 

Typical Reference Configurations

 

The following are typical reference configurations for preliminary selection, not fixed standard models. Final specifications should be confirmed according to thermal duty, fluid properties and operating conditions.

 

Heat Transfer Area

Shell Diameter

Tube Diameter

Tube Quantity

Reference Length

4 m²

DN300

25 mm

55

950 mm

6 m²

DN300

25 mm

55

1400 mm

8 m²

DN350

25 mm

85

1200 mm

10 m²

DN350

25 mm

85

1500 mm

12 m²

DN550

25 mm

187

1350 mm

20 m²

DN550

25 mm

192

1500 mm

30 m²

DN600

25 mm

226

2000 mm

 

Tube Side and Shell Side

 

Tube Side: The tube side can be assigned to the fluid according to temperature, pressure, fouling tendency and material compatibility.

 

Shell Side: The shell side provides the flow path around the tube bundle. Baffles can guide the shell-side flow across the tubes, helping reduce flow short-circuiting and improve heat-transfer performance.

 

Materials / Design / Inspection

 

  • Product-contact materials are selected according to the process medium, operating temperature, pressure and corrosion conditions.
  • The equipment can be reviewed for tube arrangement, shell-side flow, connections, cleaning access and overall installation dimensions before fabrication.
  • Manufacturing inspection can include material verification, welding and assembly inspection, dimensional checks, connection inspection and applicable pressure testing.

 

Maintenance & Cleaning

 

Maintenance requirements depend mainly on fouling characteristics, fluid composition and cleaning methods.

Before ordering, buyers should confirm:

  • Expected deposit type
  • Required cleaning frequency
  • Mechanical or chemical cleaning method
  • Tube-side access requirements
  • Inspection requirements for tubes and connections

Changes in pressure drop or heat-transfer performance during operation may indicate fouling and the need for inspection or cleaning.

 

Quotation Data Sheet

 

Information

Details to Provide

Heat-transfer duty

Heating, cooling or heat-recovery duty

Tube-side fluid

Fluid name and composition

Shell-side fluid

Fluid name and composition

Flow rate

Normal and/or maximum flow rate

Inlet temperature

Tube-side and shell-side

Outlet temperature

Tube-side and shell-side

Operating pressure

Tube-side and shell-side

Allowable pressure drop

Tube-side and shell-side

Fluid viscosity

If applicable

Corrosiveness

Fluid composition or corrosion information

Fouling tendency

Expected deposits or fouling conditions

Material requirement

Required product-contact material, if specified

Connections

Size, type and orientation

Installation space

Available length, width, height and access space

Cleaning requirement

Mechanical, chemical or other method

Quantity

Required equipment quantity

 

FAQ

 

Q: Is the listed heat-transfer area a fixed equipment specification?

A: No. The 4–30 m² configurations are typical reference options, not fixed standard models. Final heat-transfer area and equipment dimensions should be confirmed according to the process requirements.

Q: Can the heat exchanger replace an existing unit?

A: Yes. For replacement projects, the existing heat-transfer duty, connection details, operating conditions and available installation space should be provided for configuration review.

Q: Can the tube-side and shell-side connections be customized?

A: Yes. Connection size, type, orientation and location can be reviewed according to the existing process piping and installation requirements.

Q: Can the material be specified according to the process fluid?

A: Yes. Product-contact materials can be selected according to fluid composition, temperature, pressure and corrosion conditions.

Q: Can the exchanger be designed for limited installation space?

A: Yes. The overall dimensions and connection arrangement can be reviewed according to the available installation space and required maintenance access.

Q: What information is required for a quotation?

A: Key information includes heat-transfer duty, fluid types, flow rates, inlet and outlet temperatures, operating pressure, allowable pressure drop, fluid properties, connection requirements and installation conditions.

Hot Tags: shell and tube heat exchanger, China shell and tube heat exchanger manufacturers, suppliers, factory, heat exchanger condenser, Shell and Tube Heat Exchanger

Previous
No Information
Next
No Information

Send Inquiry

(0/10)

clearall