Multi-Functional Extraction and Concentration Trial Unit
Extraction and concentration pilot
The Multi-Functional Extraction and Concentration Trial Unit is designed as a pilot-scale platform for evaluating different extraction and concentration processes on one equipment system. It can be configured for hot reflux extraction with ethanol or other suitable organic solvents, water-based extraction, and vacuum concentration according to the process route.
Technical Parameters
|
Parameter |
Reference Range / Capacity |
|
Extractor Volume |
500 / 1000 / 2000 / 3000 / 6000 L |
|
Evaporator Capacity |
250 / 500 / 800 / 1000 / 2000 kg |
|
Extraction Temperature |
90–100°C |
|
Evaporation Temperature |
55–75°C |
|
Vacuum Degree |
−0.06 to −0.095 MPa |
|
Product-contact Material |
SS304 / SS316L, selected according to material properties and process requirements |
|
Heating Method |
Steam heating / thermal oil heating, configuration dependent |
Different Extraction Routes and Concentration Conditions
The unit supports different extraction and concentration routes according to process requirements.
Organic-Solvent Reflux Extraction: Supports reflux extraction with ethanol and other compatible organic solvents, with condensation and solvent recovery configured according to process requirements. Flammable solvents require appropriate safety measures.
Water-Based Extraction: Suitable for water extraction, including fractional extraction followed by concentration.
Vacuum Concentration: Extracted liquids can be concentrated under vacuum when lower evaporation temperatures are required. Reference vacuum: −0.06 to −0.095 MPa.
These options allow different process conditions to be evaluated on one pilot-scale system.
Pilot Process Development
A typical trial sequence is:
Material Preparation → Extraction → Solid-Liquid Separation → Concentration → Process Evaluation
Pilot trials can be used to compare:
- Extraction method
- Solvent ratio
- Extraction time
- Reflux conditions
- Vacuum level
- Final concentration

Main Equipment Configuration
- Extraction Tank
- Single-Effect Concentrator
- Condenser
- Oil-Water Separator
- Automatic Drainage System
- Filter
- Sanitary Class Centrifugal Pump
- Stainless Steel Bracket
Typical Pilot Applications
The trial unit can be used for process development involving botanical extraction, pharmaceutical intermediates, natural-product extraction and other suitable solid-liquid extraction processes. It is intended for evaluating extraction yield, solvent consumption, concentration conditions and process parameters before scale-up.
Key Process Development Considerations
The equipment configuration can be determined based on:
Material: Solid content, moisture, viscosity and heat sensitivity.
Process Route: Water extraction, organic-solvent reflux or other applicable methods.
Capacity: Required extractor volume and expected batch size.
Solvent: Solvent type and recovery requirements.
Concentration: Required evaporation capacity and final concentration.
Operating Conditions: Extraction temperature, evaporation temperature and vacuum level.
Utility Requirements
The required utilities depend on the selected configuration and process route. Typical requirements may include:
Steam or other heating medium
Cooling water or chilled water
Electrical power
Vacuum source
Compressed air, if required by the selected control or valve configuration
FAQ
Q: What information is needed to select the equipment size?
A: Key factors include material characteristics, required batch size, extractor volume, evaporation duty, solvent type, final concentration and operating conditions.
Q: Can the system be configured for organic-solvent recovery?
A: Yes. When solvents such as ethanol are used, suitable condensation and solvent recovery components can be configured according to the process requirements.
Q: What should be considered when processing organic solvents?
A: Solvent properties, material compatibility, operating temperature, vacuum conditions, condensation requirements and applicable safety or explosion-protection measures should be evaluated during configuration.
Q: Can the extraction and concentration sections be configured independently?
A: The extraction and concentration sections can be configured according to the selected process route, batch size and required operating conditions.
Q: What utilities are required for the trial unit?
A: Typical utilities include a heating medium, cooling water or chilled water, electrical power and a vacuum source. Exact requirements depend on the selected configuration.
Q: Can pilot trial results support production-scale equipment selection?
A: Yes. Pilot trials can provide data on extraction yield, solvent consumption, evaporation performance and concentration conditions to support process scale-up and equipment selection.
Hot Tags: multi-functional extraction and concentration trial unit, China multi-functional extraction and concentration trial unit manufacturers, suppliers, factory, Basket Type Extractor, extraction and concentration trial unit, Heat Reflux Extraction and Concentration Trial Uni, Multi Claw Extractor, Multi Functional Extraction and Concentration Trial Unit, Multi Functional Extractor
Send Inquiry
