Heat Pump Doulbe Effect Evaporator
Heat pump distiller
The Heat Pump Double Effect Evaporator is designed for liquid concentration processes that require an alternative to conventional steam heating. An electrically driven heat pump supplies the evaporation heat, while the double-effect arrangement allows heat generated within the evaporation process to be reused between effects.
Key Parameters
|
Parameter |
Reference Value |
|
Evaporation Capacity |
500–5,000 kg/h |
|
Heat Pump COP |
Approx. 3.5–5.0 |
|
Operating Temperature |
50–95°C |
|
Vacuum Degree |
-0.05 to -0.09 MPa |
|
First-Effect Pressure |
Approx. 0.2–0.8 bar(g) |
|
Product-Contact Material |
SS304 / SS316L |
|
Operation Mode |
Continuous |
|
Heating Source |
Heat pump with recoverable / low-grade heat input |
|
Cooling Medium |
Cooling water or equivalent cooling source |
Reference values only. Actual parameters depend on feed properties, evaporation duty, target concentration, heat-source conditions and system configuration.
Why Consider a Heat Pump Double-Effect Configuration
The main reason to consider a heat pump is to replace or reduce dependence on conventional steam as the external heat source. Electricity drives the heat pump cycle, while the double-effect arrangement allows evaporation heat to be reused between the two effects.
Electric-Driven Heat Supply
Electricity drives the heat pump cycle to provide the heat required for evaporation.
Reduced Steam Dependence
The system can reduce reliance on fresh external steam where steam supply or cost is a concern.
Heat Reuse Between Effects
Vapor from one effect can be reused as a heat source for the other effect, improving internal heat utilization.
Different Utility Requirements
Part of the energy demand shifts from steam toward electricity and the available heat source, changing the plant's utility requirements.
When Is a Heat Pump Configuration Worth Evaluating
A heat-pump double-effect evaporator is particularly worth evaluating when the plant:
- Has limited or expensive steam availability;
- Has access to suitable low-grade or recoverable heat;
- Wants to shift part of its evaporation energy demand from steam to electricity;
- Operates continuously enough to make heat-pump utilization meaningful;
- Needs to recover more of the thermal energy generated during evaporation.
The final selection should be based on the feed characteristics, evaporation duty, required concentration, temperature range, available heat source, electricity conditions and existing plant utilities.
Key Selection Factors
Before engineering the system, the following information should be established:
- Feed material and concentration
- Required evaporation capacity
- Target concentration
- Feed temperature
- Available heat source and temperature
- Electricity supply conditions
- Existing steam availability, if applicable
- Cooling-water conditions
- Required operating mode
FAQ
Q: Can a heat pump completely replace steam in an evaporation system?
A: It can be designed as an alternative heat source, but whether steam can be eliminated depends on the required evaporation temperature, available heat source, heat-pump capacity and overall process design.
Q: Does a heat pump use only electricity as its energy input?
A: The heat pump is electrically driven, but its thermal output can include recovered or upgraded heat from an available source. The actual heat-source arrangement depends on the process design.
Q: Can existing steam-heated evaporation lines be converted?
A: Potentially, but the existing evaporator, heat exchangers, utilities, temperature requirements and process controls should be reviewed before deciding on a heat-pump retrofit.
Q: What determines the operating cost advantage of a heat pump?
A: The comparison depends mainly on electricity price, steam cost, heat-source conditions, operating hours and the thermal duty required by the evaporation process.
Q: What information is needed to prepare a quotation?
A: To prepare a suitable configuration and quotation, basic process information such as feed composition, feed and target concentration, required evaporation capacity, operating temperature, available heat source, electricity conditions and existing plant utilities should be provided. Additional process data may be requested during engineering review.
Q: What heat sources can be used with a heat pump evaporator?
A: The available heat source depends on the heat-pump configuration and process conditions. Suitable sources may include recoverable process heat or other low-grade heat streams, subject to the required temperature and heat load.
Hot Tags: heat pump doulbe effect evaporator, China heat pump doulbe effect evaporator manufacturers, suppliers, factory, concentrator evaporator, Rising Film Evaporator, Three effect Energy saving Evaporator, Triple Effect Falling Film Evaporator, Vacuum Spherical Evaporator, Wiped Thin Film Evaporator
Send Inquiry
