Atmospheric Reactor
Tanlet atmospheric stainless steel reactor for batch reaction, mixing, heating, and cooling under atmospheric or near-atmospheric conditions – configurable with anchor/frame agitators, heating/cooling jackets, and custom connections – suitable for pharmaceutical intermediates, fine chemicals, environmental treatment, and food-related liquid or slurry processes.
Technical Parameter
|
Model and specification |
WJG 300 |
WJG 400 |
WJG 500 |
WJG 600 |
WJG 1000 |
WJG 2000 |
WJG 3000 |
WJG 5000 |
|
Jacket Pressure (MPa) |
≤0.2 MPa / ≤0.3 MPa |
|||||||
|
Motor power(Kw) |
0.55 |
0.55 |
0.75 |
0.75 |
1.1 |
1.5 |
1.5 |
2.5 |
|
Diameter(mm) |
900 |
1000 |
1150 |
1150 |
1400 |
1500 |
1700 |
2000 |
|
Tank Height (mm) |
1800 |
1900 |
2200 |
2300 |
2600 |
2900 |
3200 |
3700 |
|
Note: The above parameters are approximate data and will be customized according to the customer's design specifications. |
||||||||
Agitator Configuration for Different Material Conditions
The agitator is one of the most important parts of an atmospheric reactor – mixing performance directly affects reaction uniformity. We configure different agitation arrangements based on your material characteristics and production requirements:
Anchor Agitator: Suitable for relatively viscous materials and applications where close-to-wall mixing is important.
Frame Agitator: Provides broad mixing coverage inside the vessel – ideal for batch mixing and reaction processes requiring uniform material circulation.
Customized Agitation: For higher-viscosity materials, suspended solids, or special mixing requirements, agitator structure and drive configuration can be customized based on your process data.
Temperature Control Without Pressure Reaction
Many atmospheric reactions still require accurate thermal management. The reactor can be equipped with an external jacket for circulating heating or cooling media, allowing vessel temperature to be adjusted according to your production process.
Typical configurations include:
- Heating water circulation
- Cooling water circulation
- Thermal fluid circulation
- Steam-based heating where applicable
- Insulation for improved thermal efficiency
- Temperature measurement and control components
Jacket pressure options of ≤0.2 MPa or ≤0.3 MPa are available, with final design determined by your process requirements.
Built for Batch Production and Easy Material Discharge
For batch production, the reactor needs to support more than the reaction itself. The equipment can be configured around the complete operating sequence:
Charging → Mixing → Heating/Cooling → Reaction → Sampling → Discharge → Cleaning
The vessel structure includes the tank body, elliptical heads, agitator, jacket, support structure, drive assembly, and shaft sealing system. Material specifications and nozzle arrangements can be customized according to your process requirements.
Materials and Product-Contact Construction
Material selection should be based on the chemical characteristics of the process medium, cleaning method and required service life.
Common stainless steel options include:
- SS304 - Suitable for general-purpose processing environments
- SS316L - Preferred where higher corrosion resistance or more demanding product-contact conditions are required
- Other materials - Available for specific chemical compatibility requirements subject to engineering review
Quality & Documentation
For project-based orders, Tanlet can provide technical and quality documents for customer review, supporting drawing approval, inspection and equipment acceptance.
GA drawings and process connection details
Material certificates for product-contact components
Welding and inspection records
Pressure test records
Factory Acceptance Test (FAT) documentation
Operation & maintenance manual
FAQ
Q:What industries use Atmospheric Reactors?
A:They are commonly used in pharmaceutical intermediates, fine chemicals, environmental protection and other batch-processing applications involving mixing and controlled reaction.
Q:Can the reactor be customized?
A:Yes. Tanlet can customize the vessel material, nozzle arrangement, agitator configuration and other equipment specifications according to the customer's process requirements.
Q:Can I choose different agitator types?
A:Yes. Anchor and frame agitators are among the configurations used for this reactor series. The final agitator should be selected according to viscosity, solids content and mixing requirements.
Q:What is the standard production lead time?
A:For a standard customized reactor project, the typical lead time is 30–45 days after deposit and final technical specifications are confirmed. The actual schedule is confirmed during drawing approval.
Q:What payment terms do you accept?
A:T/T is the standard payment method. L/C can be discussed for qualified international orders, subject to order value and contract conditions.
Q:Can Tanlet provide overseas installation?
A:Yes. Tanlet provides overseas installation and training support for equipment projects when required.
Q:What is the warranty period?
A:The standard warranty period stated by Tanlet is 1 year.
Hot Tags: atmospheric reactor, China atmospheric reactor manufacturers, suppliers, factory, api reactor, Atmospheric Reactor, Pressure Reactor, reactor
Send Inquiry


