+86-577-85883661
Pressure Reactor
video
Pressure Reactor

Pressure Reactor

The Pressure Reactor is designed for sealed reactions requiring controlled pressure, temperature and agitation. It is suitable for hydrogenation, gas-liquid reactions, polymerization and other pressure-dependent processes.
Send Inquiry
Product Details ofPressure Reactor

The Pressure Reactor is designed for sealed reactions requiring controlled pressure, temperature and agitation. It is suitable for hydrogenation, gas-liquid reactions, polymerization and other pressure-dependent processes.

 

Technical Parameters

 

Parameter

Reference / Configuration

Working Volume

300–5000 L

Working / Design Pressure

To be confirmed according to process and vessel design

Working / Design Temperature

0–350℃ reference range; final rating depends on design

Vessel Material

SS304 / SS316L or specified material

Agitator Type

Selected according to viscosity and phase conditions

Agitation Speed

36–53 rpm

Shaft Seal

Mechanical seal or other configuration according to pressure and medium

Heat Transfer Area

2.0–10.4 m²

Applicable Standard

Confirmed according to destination market and project requirements

 

Designed for Pressure-Dependent Reactions

Pressure Capability

  • Pressure rating can be configured from vacuum service to high-pressure operation according to process requirements.
  • Up to 10 MPa may be available for specific vessel designs and configurations.
  • Final working and design pressure must be confirmed based on vessel size, material, temperature, medium and applicable design requirements.

Temperature Control

  • Reference operating temperature: up to 350℃ for applicable configurations.
  • Heating or cooling is provided through the jacket or other specified heat-transfer arrangement.
  • Final working and design temperature are confirmed according to the process medium and vessel design.

Agitation

Agitator type is selected according to viscosity, solid content and gas-liquid mixing requirements.

  • Reference agitation speed: 36–53 rpm.
  • Motor power: 0.55–2.5 kW for the listed configurations.
  • Shaft seal selection is based on pressure, temperature and process medium.
  • Mechanical seal or other suitable sealing arrangements can be considered for specific operating conditions.

 

Reactor Configuration

 

Component

Configuration Consideration

Reactor vessel

300–5000 L reference capacity

Vessel heads

Elliptical head design

Jacket

Heating or cooling service

Agitator

Selected for viscosity and phase conditions

Shaft seal

Selected for pressure and process medium

Process nozzles

Arranged according to process connections

Product-contact material

Selected for medium compatibility

 

Process Data Used for Reactor Selection

 

Reaction Medium - Liquid, gas-liquid or solid-liquid
Working Volume - Required batch volume
Pressure & Temperature - Working conditions and design requirements
Viscosity & Mixing - Material properties and agitation requirements
Material Compatibility - Product-contact and corrosion conditions
Heating/Cooling - Required thermal duty
Process Connections - Inlet, outlet, sampling and instrumentation

 

Engineering & Manufacturing Support

 

Tanlet evaluates the submitted process data and develops the corresponding reactor configuration, including:

  • Vessel and jacket configuration
  • Agitator and drive arrangement
  • Shaft sealing system
  • Process nozzle layout
  • Instrumentation interfaces
  • Manufacturing drawings and specifications

Process Data → Equipment Configuration → Engineering Confirmation → Manufacturing

 

Where Pressure Control Matters

Hydrogenation

Controlled hydrogen pressure and agitation

Gas-Liquid Reaction

Controlled gas dispersion and liquid mixing

Polymerization

Controlled pressure and temperature during batch reaction

 

Manufacturing & Quality Control

01/

Design Confirmation
Confirmed drawings, specifications and equipment configuration.

02/

Material Verification
Material certificates and component information are reviewed according to project requirements.

03/

Fabrication & Welding
Key fabrication and welding processes are inspected against the approved design.

04/

Final Inspection
Dimensions, connections and required factory tests are checked before delivery.

05/

Documentation
Relevant manufacturing and inspection records are prepared for project review.

FAQ

 

Q: What pressure can the Pressure Reactor handle?

A: The pressure rating is determined by vessel size, material, temperature, process medium and applicable design requirements. Configurations up to 10 MPa may be available for specific applications.

Q: Can the reactor operate under vacuum?

A: Yes. Vacuum operation can be considered when required by the process, subject to the vessel's vacuum design and applicable operating conditions.

Q: What agitator is suitable for gas-liquid reactions?

A: The agitator is selected according to viscosity, gas flow, phase characteristics and required mixing performance. The final configuration is confirmed during engineering review.

Q: How is the shaft seal selected?

A: The shaft seal is selected according to operating pressure, temperature, process medium and required leakage-control conditions. Mechanical seals and other suitable arrangements may be considered.

Q: Can the vessel material be customized?

A: Yes. Product-contact materials can be selected according to the process medium, corrosion conditions and project requirements, such as SS304, SS316L or other specified materials.

Q: What information is required for an RFQ?

A: Provide the working volume, reaction medium, working and design pressure, working and design temperature, viscosity, phase conditions, heating/cooling requirements, agitation requirements and process connections. These data are used to confirm the reactor configuration and quotation.

Hot Tags: pressure reactor, China pressure reactor manufacturers, suppliers, factory, api reactor, Atmospheric Reactor, Pressure Reactor, reactor

Previous
No Information

Send Inquiry

(0/10)

clearall