
Triple Effect Falling Film Evaporator
A triple-effect falling film evaporator for continuous low-temperature concentration – combining three-stage evaporation with falling-film heat transfer to reduce steam consumption and protect heat-sensitive materials in pharmaceutical, TCM, food, dairy, juice, biological, and chemical applications.
Technical Specifications
|
Parameter |
Reference |
|
Equipment Type |
Triple Effect Falling Film Evaporator |
|
Configuration |
Three-effect continuous evaporation |
|
Operation |
Vacuum / Low-temperature concentration |
|
Feed Mode |
Continuous |
|
Discharge Mode |
Continuous |
|
Control |
Manual / Semi-Automatic / PLC |
|
Heating Source |
Steam |
|
Material |
Stainless steel / Customized |
|
CIP |
Optional |
|
System Integration |
Customized |
Advanced Thermal & Hydrodynamic Features
Liquid Distributor & Uniform Film Formation (Anti-Dry-Boiling):Custom-engineered perforated distribution plates ensure each tube wall receives a uniform, thin liquid film – eliminating dry spots, preventing scorching/caramelization, and maintaining high heat transfer coefficients.
Low-Thermal-Stress & Short Residence Time:Liquid falls by gravity along the tubes with secondary vapor flow, preserving temperature-sensitive active compounds, vitamins, color, and flavor.
Multi-Stage Vacuum & Gradient Control:Progressive vacuum across Effects I, II, and III allows evaporation at decreasing boiling temperatures (e.g., 85°C → 70°C → 55°C). Effect I's secondary vapor serves as heating steam for Effect II – drastically reducing live steam consumption.
System Components & Flow Architecture
Evaporator Bodies: Shell-and-tube heat exchangers with mirror-polished tube interiors – ensuring efficient heat transfer and easy cleaning.
Vapor-Liquid Cyclone Separators: High-velocity tangential inlet separators ensure zero liquid entrainment into condensed water streams – protecting product purity and downstream equipment.
MVR / Thermal Vapor Recompression (TVR) Ready: Optional TVR thermal compressor integration further enhances steam efficiency and reduces energy consumption.
Automatic Density & Discharge Control System: In-line refractometer/mass flowmeter continuously monitors product Brix/concentration, automatically triggering concentrate discharge valves – ensuring consistent output without manual intervention.
Factory Pre-Assembled Skid Design
To minimize on-site installation risks and overseas engineering labor costs, Tanlet offers pre-fabricated, modular skid configurations:
100% Pre-Wired & Pre-Piped: All internal steam lines, pumps, instruments, and sanitary valves are fully assembled and pressure-tested at our factory.
Plug-and-Play Site Connection: Requires only local utility hookups (steam, electricity, cooling water, product feed) for fast commissioning within 3–5 days.

International Delivery & Export Preparation
For overseas orders, the evaporator system can be prepared according to the selected shipping method and project requirements.
Tanlet can provide:
Export-standard equipment packaging
Moisture and corrosion protection
Component labeling
Packing lists and shipping documentation
Equipment identification and technical documentation
Modular packing for large systems where required
For large evaporation systems, shipment planning can be considered together with the factory layout to simplify unloading and installation at the destination.
FAQ
Q:What products can a Triple Effect Falling Film Evaporator concentrate?
A:It is commonly used for pharmaceutical and TCM extracts, juice, dairy products, glucose and other liquid materials. Suitability depends on viscosity, solids content, foaming and scaling characteristics.
Q:Why choose three effects instead of a single-effect evaporator?
A:Three-effect evaporation reuses secondary vapor between stages, improving steam utilization and reducing fresh-steam demand. The economic benefit becomes more significant for continuous, high-volume production.
Q:Can the final concentration be customized?
A:Yes. The system can be designed according to the required feed concentration, final concentration and evaporation capacity.
Q:Can it be connected to an existing extraction line?
A:Yes. The evaporator can be connected with extraction, filtration, storage, drying and other upstream or downstream equipment according to the process layout.
Q:What information is required for quotation?
A:Please provide the feed flow rate, initial concentration, target concentration, product temperature limit and available steam conditions. These parameters are sufficient for an initial equipment evaluation.
Q:What is the production lead time?
A:The standard production lead time is approximately 30–45 days after deposit and final technical specifications are confirmed. The delivery date is stated in the purchase contract.
Q:What payment methods are available?
A:T/T (bank transfer) is the standard payment method. L/C can also be accepted for qualified orders.
Hot Tags: triple effect falling film evaporator, China triple effect falling film evaporator manufacturers, suppliers, factory, Heat Pump Doulbe Effect Evaporator, MVR Rising Film Evaporator, Rising Film Evaporator, Three effect Energy saving Evaporator, Vacuum Spherical Evaporator, Wiped Thin Film Evaporator
Send Inquiry