
Double Effect Falling Film Evaporator
The Double Effect Falling Film Evaporator combines thin-film evaporation with two-stage heat utilization to achieve efficient continuous concentration with short thermal exposure, making it suitable for heat-sensitive, foaming and high-concentration liquid materials.
Technical Specifications & Parameter Matrix
|
Parameter |
Standard Range / Specification |
Custom Options |
|
Evaporation Capacity |
500 kg/h to 20,000+ kg/h |
Modular scale-up up to 50,000 kg/h |
|
Material of Construction (MOC) |
Stainless Steel 304 / 316L |
Duplex SS (2205/2507), Titanium, Hastelloy |
|
Steam Consumption Ratio |
~0.47 – 0.52 kg steam / kg water evaporated |
Integratable with TVR (Thermal Vapor Recompression) |
|
Operating Vacuum Pressure |
−0.08 MPa to −0.095 MPa (Adjustable) |
High-vacuum process controls |
|
Heating Medium |
Saturated Industrial Steam / Thermal Fluid |
Waste heat recovery integrated |
|
Evaporator Type |
Tubular Falling Film (Shell & Tube Heat Exchanger) |
Plate type (optional upon request) |
|
Control System |
PLC Automation + Touchscreen HMI |
Full DCS Integration / SCADA |
Built for Industrial Concentration, Not Just Water Removal
Two-Effect Heat Utilization:Secondary vapor generated in the first effect is reused as the heating source for the next effect, improving the utilization of available thermal energy.
Falling Film Heat Transfer:Feed liquid is distributed over the heating tubes and flows downward as a thin film, creating a large heat-transfer area with limited material hold-up.
Short Thermal Exposure:The thin-film flow path and vacuum operation reduce the time materials remain exposed to elevated temperatures, which is important for heat-sensitive products.
Controlled Concentration:Material flow, evaporation conditions and discharge concentration can be coordinated according to the required process target rather than relying on prolonged batch heating.
Why Double Effect Falling Film Evaporation?
For buyers, the key difference is not simply the number of effects-it is how the evaporation system manages energy consumption, product exposure, throughput and process stability.
|
Procurement Concern |
Double Effect Falling Film Solution |
|
Steam consumption |
Reuses secondary vapor between effects |
|
Heat-sensitive materials |
Vacuum operation and short heating exposure |
|
High-concentration liquids |
Thin-film flow supports efficient heat transfer |
|
Foaming materials |
Vapor-liquid separation is integrated into the process |
|
Continuous production |
Designed for continuous feeding and concentration |
|
Material quality |
Reduced thermal exposure helps limit excessive heat impact |
|
Process control |
Temperature, vacuum, feed and discharge conditions can be coordinated |
Process Configuration
The Double Effect Falling Film Evaporator is built as an integrated evaporation system rather than a standalone heating vessel.
Core Equipment:
- First-effect evaporator
- Second-effect evaporator
- First- and second-effect vapor-liquid separators
- Condenser
- Vacuum system
- Material transfer / circulation pumps
- Condensate system
- Valves and process piping
- Electrical control cabinet
- Operating platform
- Optional thermal compression system
The exact configuration can be adjusted according to the material characteristics, evaporation capacity and plant utilities.
Performance Advantages for Production Lines
Lower Thermal Load:Vacuum operation enables evaporation at lower product temperatures than atmospheric evaporation, helping protect heat-sensitive materials.
High Heat-Transfer Efficiency:Thin-film flow provides a large effective heat-transfer area and supports rapid evaporation.
Low Material Hold-Up:A relatively small quantity of material remains inside the evaporation section at any given time, allowing tighter control of thermal residence time.
Flexible Operation:The system can support automatic or manual operation depending on production requirements and control-system configuration.
Suitable for Heat-Sensitive and Difficult-to-Evaporate Materials
The Double Effect Falling Film Evaporator is particularly applicable where conventional long-time heating may affect product quality.
Food & Beverage:Tomato sauce, fruit juice, jam, milk, honey, chili products and other liquid or semi-liquid food materials.
Nutritional & Biological Products:Concentrated extracts and other heat-sensitive biological or nutritional liquids.
Pharmaceutical Processing:Suitable for concentration processes where controlled temperature and short residence time are important process considerations.
Chemical & Industrial Liquids:Applicable to selected chemical solutions and other liquid materials requiring continuous evaporation and concentration.
FAQ
Q: How does a Falling Film Evaporator differ from Rising Film or Forced Circulation types?
A: Falling film flows liquid down vertical tubes by gravity – short residence time, low holdup, ideal for heat-sensitive liquids. Rising film uses vapor drag upward, requiring higher ΔT. Forced circulation uses high-flow pumps for viscous or crystallizing liquids.
Q:Can the system be integrated into an existing production line?
A:Yes. The evaporation system can be engineered together with upstream feeding/preheating and downstream processing equipment according to the customer's process layout.
Q:Can the evaporator operate automatically?
A:The system can be configured for automatic or manual operation. The degree of automation can be determined according to production requirements and the customer's control architecture.
Q:What information is required for a quotation?
A:Please provide the material name, feed and target concentration, required evaporation capacity, viscosity, heat sensitivity, foaming/fouling characteristics, available steam conditions and cooling-water conditions.
Q:What is the standard lead time?
A:For a standard customized project, the typical production lead time is 30–45 days after the deposit and final technical specifications are confirmed. The final schedule is confirmed during order review.
Q:What payment terms are available?
A:T/T is the standard payment method. L/C can be discussed for qualified international orders, subject to the final contract and order conditions.
Hot Tags: double effect falling film evaporator, China double effect falling film evaporator manufacturers, suppliers, factory, Balanced Double Effect Evaporator, Double Effect Falling Film Evaporator, Heat Pump Doulbe Effect Evaporator, Single effect External Circulation Vacuum Evaporator, Vacuum Spherical Evaporator, Wiped Thin Film Evaporator
Send Inquiry