
Rising Film Evaporator
The Rising Film Evaporator is designed for continuous concentration of low-viscosity liquids where stable throughput and controlled thermal exposure are required. Feed enters the vertical heating tubes from the bottom and rises with generated vapor, forming a thin liquid film that supports continuous evaporation and heat transfer.
Typical Technical Reference
|
Parameter |
Typical Industry Reference |
|
Evaporation Capacity |
Approx. 500–20,000 L/h for representative industrial units |
|
Tube Length |
Approx. 3–9 m for some industrial configurations |
|
Product-Contact Material |
SS304 / SS316L, application dependent |
|
Heating Medium |
Saturated steam or other suitable heating medium |
|
Operation |
Continuous |
|
Operating Mode |
Atmospheric or vacuum, process dependent |
|
Number of Effects |
Single or multiple effects |
Suitable Feed Conditions
Low to moderate viscosity
Supports stable upward film flow and heat transfer.
Stable flow characteristics
Suitable for continuous and uniform evaporation.
High evaporation duty
Suitable for continuous removal of water or other volatile components.
Heat-sensitive components
Continuous film flow can help reduce prolonged thermal exposure.
Low to moderate solids content
Supports stable flow and helps limit fouling.
Manageable foaming tendency
Suitable when foaming can be controlled through process and separator design.
Feed properties should be reviewed before equipment selection. Highly viscous, strongly crystallizing or heavily scaling materials may require forced-circulation or wiped-film evaporation.
Process Configuration
Heating System: Vertical heating tubes provide the heat-transfer surface for upward liquid-film evaporation. Tube length and heating area are selected according to evaporation duty and feed properties.
Vapor-Liquid Separation: The vapor-liquid separator is sized according to vapor load for stable separation of concentrate and secondary vapor.
Single or Multiple Effects: A single-effect arrangement can be used for simpler process requirements, while multiple-effect configurations can be considered when steam utilization and heat recovery are important.
Vacuum and Condensation: Operating pressure and condenser capacity are matched to boiling conditions, vapor load and available cooling utilities.
Product Handling: Feed pumps, concentrate discharge and process instrumentation are configured according to viscosity changes, flow requirements and the desired degree of automation.
Typical Applications
Rising film evaporation can be applied to suitable low-viscosity process liquids in industries including:
Botanical extract concentration
Food liquid concentration
Aqueous process solution concentration
Pharmaceutical process liquid concentration
The final configuration depends on feed composition, viscosity, solids content, concentration target and required evaporation capacity.
Engineering & Manufacturing Support
- Equipment configuration is reviewed against feed properties, evaporation duty, operating pressure and available utilities before quotation.
- Depending on project requirements, Tanlet can provide equipment drawings, utility data, process connections, instrumentation details and inspection documentation for engineering review.
Information Required for Quotation
|
Required Information |
Typical Data |
|
Feed Flow Rate |
kg/h or L/h |
|
Initial Concentration |
% |
|
Target Concentration |
% |
|
Feed Temperature |
°C |
|
Product Viscosity |
cP |
|
Solids Content |
% |
|
Required Evaporation Capacity |
kg/h |
|
Heating Medium |
Steam / other |
|
Available Steam Pressure |
MPa |
|
Cooling Water Conditions |
Inlet temperature / flow |
|
Operating Requirement |
Atmospheric / vacuum |
|
Product Characteristics |
Foaming / scaling / heat sensitivity |
FAQ
Q: Can the evaporator be connected to an existing steam and cooling-water system?
A: Yes. Existing utility conditions can be considered during system design. Steam pressure, cooling-water temperature and flow rate should be provided to confirm heat-transfer and condensation requirements.
Q: How is the system sized when product viscosity changes during concentration?
A: The viscosity profile from feed to final concentrate should be provided where available. Changes in viscosity can affect heat transfer, flow behavior and equipment sizing, so the concentration process should be evaluated across the operating range.
Q: What determines the selection between single-effect and multiple-effect operation?
A: The selection depends mainly on evaporation duty, available steam, energy requirements, process configuration and investment considerations. Multiple-effect arrangements can be evaluated when greater heat recovery is required.
Q: Can technical drawings and utility requirements be provided before fabrication?
A: Technical documentation can be prepared according to the confirmed equipment configuration and project requirements. Typical information may include equipment dimensions, process connections, utility requirements and instrumentation details.
Q: What feed properties are most important for rising film evaporation?
A: Feed viscosity, solids content, foaming tendency, scaling tendency and crystallization behavior are important because they affect film formation, heat transfer and continuous operation.
Q: Can the evaporator be customized for different capacities or process conditions?
A: Yes. Heating area, tube configuration, operating pressure, condenser capacity, product-contact materials and auxiliary equipment can be configured according to the required evaporation duty and process conditions.
Hot Tags: rising film evaporator, China rising film evaporator manufacturers, suppliers, factory, Balanced Double Effect Evaporator, Heat Pump Doulbe Effect Evaporator, Rising Film Evaporator, Three effect Energy saving Evaporator, Vacuum Spherical Evaporator, Wiped Thin Film Evaporator
Send Inquiry