
Three-effect Energy-saving Evaporator
The Three-Effect Energy-Saving Evaporator concentrates liquid materials through three evaporation stages, with secondary steam from each effect reused as the heating source for the following effect.
This multi-effect configuration reduces fresh-steam demand and supports continuous vacuum concentration for pharmaceutical, food, beverage and chemical applications.
Technical Parameters
Capacity & Steam Consumption
|
Parameter |
Reference Range |
|
Evaporation Capacity |
1,000–6,000 kg/h |
|
Fresh Steam Consumption |
Approx. 330–2,000 kg/h |
|
Reference Steam Economy |
Approx. 2.5–3.0 kg evaporation/kg fresh steam |
|
Heating Steam Pressure |
Approx. 0.2–0.3 MPa |
|
Cooling Water |
Determined by evaporation duty and cooling-water temperature |
Reference Operating Conditions
|
Effect |
Typical Operating Pressure* |
Typical Evaporation Temperature* |
|
First Effect |
Approx. 0.06–0.08 MPa abs. |
Approx. 85–95°C |
|
Second Effect |
Approx. 0.04–0.06 MPa abs. |
Approx. 75–85°C |
|
Third Effect |
Approx. 0.02–0.04 MPa abs. |
Approx. 60–75°C |
Reference values for water evaporation. Actual operating pressure and temperature depend on feed properties, concentration requirements and process conditions.
Design Basis
Reference evaporation capacity is based on water evaporation under the stated steam and vacuum conditions.
Equipment selection should consider:
- Feed flow rate
- Initial and final concentration
- Evaporation duty
- Feed viscosity
- Boiling-point elevation
- Product heat sensitivity
- Available steam pressure
- Cooling-water temperature and flow
- Required operating mode
For non-water materials, actual evaporation capacity and steam consumption should be determined from process data rather than directly applying the water-based reference values.
Construction & Materials
|
Item |
Reference Configuration |
|
Evaporation System |
Three-effect shell-and-tube evaporation system |
|
Heating Method |
External steam heating |
|
Product-contact Parts |
SS304 / SS316L |
|
Heating Tubes |
SS304 / SS316L, process dependent |
|
Evaporation Chambers |
SS304 / SS316L or material specified according to process requirements |
|
Insulation |
Thermal insulation with external cladding |
|
Process Connections |
Flanged or customized |
|
Utility Connections |
Steam, condensate, cooling water and vacuum |
|
Instrumentation |
Temperature, pressure/vacuum and process monitoring instruments |
Three-Effect Steam Reuse
Fresh Steam → Effect 1 → Effect 2 → Effect 3 → Condenser
Secondary vapor from each effect is reused as the heating source for the following effect, reducing fresh-steam consumption. The final vapor is condensed through the condenser system.
Main Components
- Three evaporation effects
- Vapor-liquid separators
- Inter-effect vapor piping
- Material circulation and discharge system
- Condenser
- Vacuum system
- Condensate system
- Cooling-water system
- Process instrumentation
Typical Applications
Pharmaceutical & Traditional Medicine: Concentration of pharmaceutical solutions, extracts and other liquid preparations.
Food & Beverage: Concentration of glucose, starch-derived liquids, extracts and other suitable food-process liquids.
Chemical Processing: Continuous concentration of process liquids where controlled temperature and steam consumption are important.
Heat-Sensitive Products: Vacuum concentration where lower boiling temperatures and controlled thermal exposure are required.
Engineering & Application Support
Process Evaluation: Selection based on feed rate, concentration target, evaporation duty and material characteristics.
Utility & System Matching: Steam, cooling-water, vacuum and process connections are reviewed according to the selected configuration.
Customization: Evaporation capacity, material selection, process connections, equipment layout and auxiliary systems can be configured according to specific process and installation requirements.
Technical Documentation: Technical specifications, drawings and operating documentation can be provided according to project requirements.
FAQ
Q: What is the steam economy of a three-effect evaporator?
A: A typical three-effect system can achieve approximately 2.5–3.0 kg water evaporation per kg fresh steam under suitable operating conditions. Actual steam economy depends on the feed material and process design.
Q: Why does the system use three evaporation effects?
A: Three effects allow secondary vapor energy to be reused between stages, reducing fresh-steam consumption compared with single-effect evaporation.
Q: Can the evaporation temperature be adjusted?
A: Yes. Operating pressure and evaporation temperature can be configured according to product heat sensitivity, required concentration and available temperature difference.
Q: What materials are commonly used for product-contact parts?
A: SS304 and SS316L are common options. The final material should be selected according to the product composition, corrosion requirements and applicable process standards.
Q: Can the evaporator handle heat-sensitive materials?
A: Yes. Vacuum operation reduces the boiling temperature, helping limit thermal exposure. The appropriate operating temperature should be determined from the material's heat sensitivity.
Q: What information is required for equipment selection?
A: Please provide feed rate, initial and final concentration, material characteristics, viscosity, heat sensitivity, required evaporation capacity, steam pressure and cooling-water conditions. These data are used to determine the evaporation area and overall system configuration.
Hot Tags: three-effect energy-saving evaporator, China three-effect energy-saving evaporator manufacturers, suppliers, factory, Double Effect Falling Film Evaporator, Heat Pump Doulbe Effect Evaporator, MVR Rising Film Evaporator, Single effect External Circulation Vacuum Evaporator, Three effect Energy saving Evaporator, Vacuum Spherical Evaporator
Send Inquiry