Continuous Vacuum Belt Dryer
The Continuous Vacuum Belt Dryer is designed for continuous drying of liquids, concentrates and flowable pastes under vacuum. Material is continuously distributed onto a moving belt and dried through multiple heating zones.
With heating areas of 50–210 m², adjustable drying conditions and steam, hot water or hot oil heating options, the dryer can be configured according to required evaporation capacity, feed characteristics and production requirements.
Technical Specifications
|
Parameter |
Reference Data |
|
Model |
TYD450–TYD10210 |
|
Heating Area |
50–210 m² |
|
Heating Temperature |
30–135°C, adjustable |
|
Feed Moisture |
20–80% |
|
Dried Product Moisture |
0.2–5%, adjustable |
|
Heating Resource |
Steam / Hot Water / Hot Oil |
|
Water Evaporation |
27.5–168 kg/h |
|
Dryer Body Power |
10–25.5 kW |
|
Feed Requirement |
Flowable material |
Continuous Drying Process
The feed is evenly distributed onto the moving belt to maintain a consistent product layer and drying load.
The material passes through successive heating zones while moisture is gradually removed under vacuum.
Belt speed can be adjusted according to the required drying time and material characteristics.
The dried product is continuously discharged for collection or transfer to downstream equipment.
When to Consider a Continuous Vacuum Belt Dryer
Production lines requiring continuous rather than batch drying
Pumpable liquids, extracts and concentrated feeds
Processes where the material becomes more viscous during drying
Products requiring controlled heat exposure
Processes requiring continuous downstream material handling
Available Models and Drying Capacity
|
Model |
Heating Area (m²) |
Water Evaporation (kg/h) |
|
TYD450 |
50 |
27.5–40 |
|
TYD560 |
60 |
33–48 |
|
TYD680 |
80 |
45–55 |
|
TYD6100 |
100 |
55–80 |
|
TYD7120 |
120 |
65–95 |
|
TYD8150 |
150 |
82–120 |
|
TYD10210 |
210 |
115–168 |
Model Selection
The appropriate model is selected based on required water evaporation, feed rate, initial and target moisture, feed characteristics and available heating conditions. The listed evaporation capacity is for reference; final sizing should be confirmed based on actual feed and operating conditions.
Feed Information Required for Selection
- Feed rate and initial moisture
- Target final moisture
- Solids content and viscosity
- Thermal sensitivity
- Foaming or sticking tendency
- Required water evaporation
- Available heating resource
Manufacturing & Configuration
Equipment configuration is based on confirmed feed, drying duty and production requirements.
Product-contact materials are selected according to material characteristics, corrosion requirements and process conditions.
Feeding, vacuum, heating and condensation systems are configured according to the drying process.
Key dimensions, connections and major components are checked against the approved equipment design before delivery.
Process drawings, equipment specifications, utility requirements and operating documents can be provided according to project requirements.
FAQ
Q: How is product sticking to the belt addressed?
A: For sticky materials, belt surface selection, feed distribution and discharge design can be evaluated together to reduce buildup and improve product release.
Q: What happens if the feed material foams during drying?
A: Foaming behavior can be considered when designing the vapor space, vacuum system and separation arrangement to help manage vapor and foam carryover.
Q: Can the dryer be connected to an existing production line?
A: Yes. Feeding, discharge and utility connections can be coordinated with upstream and downstream equipment according to the existing plant layout.
Q: What information is needed before final sizing?
A: Feed rate, initial and target moisture, solids content, viscosity, thermal sensitivity and heating conditions are typically required for final equipment sizing.
Q: Can the dried product be transferred directly to downstream equipment?
A: The discharge section can be arranged for connection with conveyors, crushers, granulators or other downstream equipment according to the required product-handling process.
Q: Is a material test recommended before final equipment design?
A: For difficult-to-dry, sticky or highly variable materials, testing can help evaluate feeding behavior, drying characteristics and product discharge before final equipment sizing.
Hot Tags: continuous vacuum belt dryer, China continuous vacuum belt dryer manufacturers, suppliers, factory, Continuous Vacuum Belt Dryer, drying, vacuum belt dryer, Vacuum Belt Dryer Continuous Low Temperature Vacuum Drying Equipment
Send Inquiry




