Heat Reflux Extraction and Concentration Trial Uni
Extraction and concentration pilot
The Heat Reflux Extraction and Concentration Trial Unit is designed for pilot-scale extraction and concentration of medicinal, botanical and other suitable process materials. It integrates heat reflux extraction, solvent recovery and concentration into one process system, helping users evaluate extraction and concentration conditions before selecting production-scale equipment.
Technical Parameters
|
Parameter |
Reference Range / Configuration |
|
Extractor Volume |
500 / 1000 / 2000 / 3000 / 6000 L |
|
Evaporation Capacity |
250 / 500 / 800 / 1000 / 2000 kg/h |
|
Extraction Temperature |
90–100°C |
|
Evaporation Temperature |
55–75°C |
|
Vacuum Degree |
−0.06 to −0.095 MPa |
|
Product-Contact Material |
SS304 / SS316L, process dependent |
Heat Reflux Extraction Process
Material Loading → Heating and Extraction → Vapor Evaporation → Condensation → Solvent Reflux → Concentration
Material Loading: Medicinal or botanical materials and the required solvent are charged into the extraction tank.
Heating and Extraction: The mixture is heated under the selected extraction conditions to promote solid-liquid extraction.
Condensation and Reflux: Generated vapor is condensed, and the recovered solvent is returned to the extraction tank for continued reflux extraction.
Concentration: The extracted liquid is concentrated under controlled evaporation and vacuum conditions.
This configuration allows extraction, solvent recovery and concentration to be evaluated within one integrated pilot process.

Main Equipment Configuration
The integrated system can include:
- Extraction Tank
- Single-Effect Evaporator
- Condenser
- Oil-Water Separator
- Automatic Drainage System
- Filter
- Sanitary Centrifugal Pump
- Stainless Steel Support Frame
Process Control for Trial Development
For pilot and process-development work, operating conditions need to be monitored and adjusted during extraction and concentration. The control system can be configured to manage key parameters such as:
- Heating temperature
- Evaporation temperature
- Reflux temperature
- Vacuum
- Pressure
- Concentration conditions
- Concentrated-liquid level
Reference Process Performance
Under manufacturer reference conditions, a complete extraction and concentration cycle may take approximately 4–6 hours. Reference data indicate potential reductions of around 50% in solvent and steam consumption and an approximately 15% improvement in concentration efficiency.
Actual performance depends on material properties, solvent type, batch size and operating conditions. These figures should be verified through pilot testing.
Applications
Herbal and botanical extraction - Extraction of active components from roots, leaves, flowers and other plant materials.
Ethanol reflux extraction - Heated extraction where ethanol is used as the process solvent and recovered through condensation and reflux.
Water extraction and concentration - Extraction of water-soluble components followed by concentration of the resulting extract.
Heat-sensitive extract processing - Vacuum concentration where lower evaporation temperatures are required to limit thermal exposure.
New extraction process trials - Evaluation of extraction temperature, reflux conditions, solvent ratio and concentration parameters before scale-up.
Pharmaceutical and natural-product R&D - Pilot testing of extraction and concentration processes for medicinal and natural-product materials.
Engineering & Customization
Final equipment configuration can be determined according to material characteristics, solvent type, extraction capacity, concentration requirements, operating temperature, vacuum conditions and control requirements.
Process data can be reviewed before quotation to determine the appropriate extractor volume, evaporation capacity, auxiliary equipment and control requirements.
FAQ
Q: What solvents can be used with the heat reflux trial unit?
A: Water, ethanol and other compatible solvents can be considered according to the process. Solvent compatibility should be evaluated based on the material, solvent properties, operating temperature, vacuum conditions and product-contact materials.
Q: Can extraction and concentration be performed in the same unit?
A: Yes. The unit integrates heat reflux extraction, solvent recovery and concentration within one process system, allowing these operations to be evaluated as part of the same pilot process.
Q: Can the unit operate under vacuum?
A: Yes. The unit can operate under vacuum conditions, with a reference vacuum range of −0.06 to −0.095 MPa. The actual operating vacuum should be determined according to the material and concentration requirements.
Q: Is this unit suitable for heat-sensitive materials?
A: Yes. It is suitable for processes requiring reduced evaporation temperatures and controlled thermal exposure. Final extraction and concentration conditions should be selected according to the characteristics of the material.
Q: What information is required for equipment selection?
A: Key information includes the material characteristics, solvent type, required extractor volume, extraction temperature, solvent ratio, concentration target, evaporation capacity and vacuum requirements. These parameters help determine the appropriate equipment configuration.
Q: Can the equipment configuration be adapted to different pilot processes?
A: Yes. The extractor volume, evaporation capacity, auxiliary equipment and control configuration can be selected according to the required process. The final configuration is determined based on material characteristics, solvent type and operating requirements.
Hot Tags: heat reflux extraction and concentration trial uni, China heat reflux extraction and concentration trial uni manufacturers, suppliers, factory, Basket Type Extractor, extraction and concentration trial unit, extractor tank, Heat Reflux Extraction and Concentration Trial Uni, Multi Functional Extraction and Concentration Trial Unit, Multi Functional Extractor
Send Inquiry


