
Fully Automatic Chromatography Separation Unit
The Fully Automatic Chromatography Separation Unit is designed for industrial purification processes requiring controlled column operation, stable fluid distribution and automated process management.
The system integrates chromatography columns, pumps, valves, process instruments and control functions into one coordinated separation platform.
Technical Specifications
|
Parameter |
Typical / Reference Range |
|
Column Configuration |
Single or multiple columns |
|
Column Diameter |
Approx. 100–2,000 mm |
|
Bed Height |
Approx. 300–3,000 mm |
|
Flow Rate |
Approx. 0.1–100 m³/h |
|
Operating Pressure |
Typically 0.1–0.6 MPa |
|
Operating Temperature |
Approx. 5–80°C |
|
Control System |
PLC / DCS with HMI |
|
Product Contact Material |
SS304 / SS316L |
|
Process Monitoring |
Pressure, flow, temperature, pH, conductivity, UV/NIR |
Reference values only. Final specifications depend on the separation medium, feed characteristics, required throughput and process conditions.
System Configuration
The system can be configured with:
Chromatography Columns – Single or multiple columns according to process requirements.
Process Pumps – Controlled delivery of feed, washing solutions, eluents and regeneration liquids.
Automated Valves – Defined and switched flow paths for each process stage.
Process Instruments – Pressure, flow, temperature, pH, conductivity and other selected signals.
Control System – PLC or DCS with centralized HMI operation.
Process Piping – Designed according to flow paths, connections and product-contact requirements.
Automation – Sequence control, recipes, alarms, interlocks and data logging.
Key Process Functions
Loading
Controlled feed introduction through the selected chromatography column.
Washing
Automated delivery and discharge of washing solutions.
Elution
Controlled eluent flow and target fraction collection.
Regeneration
Automated regeneration cycles for preparing the separation medium for subsequent operation.
Column Switching
Automatic switching between columns according to the configured process sequence.
Column Packing
Packing procedures can be integrated with the system and coordinated with the required packing equipment and air-compressor connection.
Automation & Monitoring
The automation system coordinates pumps, valves, instruments and process sequences through a centralized operator interface.
PLC / DCS: Controls equipment and defined operating sequences.
HMI: Displays process status, parameters and alarms.
Recipe Management: Stores and executes repeatable process sequences.
Alarm & Interlock: Provides protection for selected abnormal operating conditions.
Data Logging: Records selected process parameters and operating events.
Online Monitoring: Pressure, flow rate, temperature, pH, conductivity, UV and NIR can be incorporated according to process requirements.
Applications
The unit supports industrial chromatography processes for separation, purification, fractionation and enrichment in:
Pharmaceutical & Bioprocessing
- Pharmaceutical intermediate purification
- Natural-product purification
- Process development and scale-up
Botanical & Herbal Processing
- Herbal extract purification
- Phytochemical separation
- Active compound enrichment
Food & Functional Ingredients
- Functional ingredient purification
- Natural compound separation
Specialty Chemical Processing
- Selective compound separation
- Fraction purification
Project Configuration
|
Project Parameter |
Information Required |
|
Feed Material |
Composition, concentration and physical properties |
|
Target Product |
Compound or fraction to be recovered |
|
Processing Capacity |
Batch size, feed volume or throughput |
|
Separation Medium |
Resin, adsorbent or packing material |
|
Column Dimensions |
Diameter and bed height, if known |
|
Operating Conditions |
Flow, pressure and temperature |
|
Process Monitoring |
Required measurement points |
|
Automation Scope |
Control and plant-interface requirements |
Engineering & Manufacturing Capability
The system is engineered and assembled according to the required separation process, column arrangement and plant interface. Engineering scope can include process configuration, piping design, pump and valve selection, instrumentation, PLC/DCS programming and system integration.
Manufacturing and assembly can cover equipment fabrication, piping assembly, component installation, electrical integration and final inspection according to the agreed project scope.
Process Data → Equipment Configuration
Feed characteristics, target product and laboratory/pilot results.
Column size, flow conditions, capacity and operating parameters.
Columns, pumps, valves, instruments, piping and automation.
Layout, utilities, interfaces and documentation.
FAQ
Q: Can multiple chromatography columns be operated automatically?
A: Yes. The system can coordinate multiple columns through defined series, parallel or column-switching sequences.
Q: What process stages can be automated?
A: Loading, washing, elution, regeneration, column switching and selected packing procedures can be incorporated into the automated sequence.
Q: What parameters can be monitored?
A: Depending on the configuration, pressure, flow rate, temperature, pH, conductivity, UV and NIR signals can be monitored.
Q: Can the system connect to an existing plant control system?
A: Yes. Communication and control interfaces can be configured according to the existing plant architecture.
Q: Can the column size be customized?
A: Yes. Column dimensions are determined according to feed characteristics, separation requirements, throughput and process data.
Q: What information is needed for preliminary equipment configuration?
A: Feed characteristics, target product, throughput, separation medium, operating conditions and automation requirements are useful for preliminary system evaluation.
Hot Tags: fully automatic chromatography separation unit, China fully automatic chromatography separation unit manufacturers, suppliers, factory, Fully Automatic Chromatography Separation Unit, Fully Automatic Large Pore Resin Adsorption Unit, purification and separation
Send Inquiry